Biocides prevent or eliminate all bacterial (fungi, algae, yeasts) contamination.

Help lower the pour point temperature (the temperature at which a fluid ceases to flow) and thus prevent precipitation of paraffin's.

Improves the low temperature operability of gas oil and diesel when cooled below the cloud point temperature. Including Bio-diesel (gas and diesel oil blended with different types of FAME).

Improve the point at where small crystals forms in gasoil and diesel; keep it clear. The formation of crystals can be visually observed as gas and diesel oil cools.

Generate the formation of radicals within the gas and diesel oil, which again will improve the ignition delay of the fuel.

Improve the water separation rate in distillate gasoline or diesel storage tanks. This results in reduced settling time.

Are used to stop or prevent darkening caused by thermal or oxidative degradation and prevent gum formation.

Improve the lubricity of gas and diesel oil by creating a film layer on metal surfaces. E.g. when switching from regular to ultra low sulphur MGO (500ppm) for a limited periode.

Help lower the pour point temperature (the temperature at which a fluid ceases to flow) and thus prevent precipitation of paraffin's.

This is used to break up oil and water emulsions in fuel oil.

Break up H2S into sulfides

Tank cleaners are cleaning agents used as a solvent cleaner and oil dispersant.

Dyes and Markers are used to color and mark fuels.

Improves the electrical conductivity within gas oil and diesel. They are used to dissipate any static charge which may build within the gas oil and diesel.

Modifying commercial Jet A-1 quality to fulfil military JP-8 specifications.